Brother DCP 585CW - Color Inkjet - All-in-One User Manual page 126

Creating a user defined File Name
In addition to the seven preset file names you can store two user defined file names that can be used for
creating an FTP Server Profile.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Scan to FTP.
Press OK.
d
Press a or b to choose File Name1 or File Name2.
Press OK.
e
Enter a file name you want to use. A maximum of 15 characters can be entered for each of the user
defined names.
Press OK.
f
Press Stop/Exit.
Pre-configuring your FTP profiles
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Scan to FTP.
Press OK.
d
Press a or b to choose Setup Profile.
Press OK.
e
Press a or b to choose Not Registered.
Press OK.
f
Press a or b to choose Profile Name.
Press OK.
g
Enter the name that you want to use for the profile of the FTP server. This name will be displayed on the
LCD of the machine and can be up to 30 characters.
Press OK.
h
Press a or b to choose Host Address.
Press OK.
i
Enter the Host Address (for example ftp.example.com) (up to 60 characters) or the IP address (for
example 192.23.56.189).
Press OK.
Control panel setup
6
6
6
116