Brother DCP 585CW - Color Inkjet - All-in-One User Manual page 97
Multiprotocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP 585CW - Color Inkjet - All-in-One:
- Guia del usuario en red manual (196 pages) ,
- Guía de configuración rápida (43 pages) ,
- User manual (256 pages)
Table of Contents
Advertisement
APIPA
The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the BOOT
Method you have set (see BOOT Method on page 76). Choosing Off means the IP address doesn't change,
when the print server cannot obtain an IP address through the BOOT Method you have set.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose APIPA.
Press OK.
f
Press d or c to choose On or Off.
Press OK.
g
Press Stop/Exit.
For MFC-5490CN
a
Press Menu, 5, 1, 9.
b
Press a or b to choose On or Off.
Press OK.
c
Press Stop/Exit.
For Touchscreen models
a
Press MENU.
b
Press Network.
c
(For Wired) Press Wired LAN.
(For Wireless) Press WLAN.
d
Press TCP/IP.
e
Press a or b to display APIPA and then press APIPA.
f
Press On or Off.
g
Press Stop/Exit.
Control panel setup
6
6
6
6
87
Advertisement
Table of Contents
Troubleshooting
