Lenovo ThinkPad L410 Deployment Manual page 34

Table 2. Power Plan (Scheme) Deployments (continued)
Policy settings
Low battery action (DC)
Reserve battery alarm level (AC)
Reserve battery alarm level (DC)
Critical battery alarm level (AC)
28
Power ManagerDeployment Guide
Description
Specifies the action that the Windows operating system
takes when battery capacity reaches the low battery
alarm level.
Possible actions include:
• Do nothing
• Sleep
• Hibernate
• Shut down
This setting is not supported on Windows XP client
computers.
Specifies the percentage of battery capacity remaining
that triggers reserve power mode.
If you enable this policy setting, you must enter a numeric
value (percentage) to set the battery level that triggers the
reserve power notification.
This setting is supported only on Windows 7 client
computers.
Specifies the percentage of battery capacity remaining
that triggers reserve power mode.
If you enable this policy setting, you must enter a numeric
value (percentage) to set the battery level that triggers the
reserve power notification.
This setting is supported only on Windows 7 client
computers.
Specifies the percentage of battery capacity remaining
that triggers the critical battery alarm action.
If you enable this policy setting, you must enter a numeric
value (percentage) to set the battery level that triggers
the critical notification.
Note: The value should be lower than the level specified
by Low battery alarm level.
To set the action that is triggered, see the critical battery
alarm action (AC) policy setting in Table 2 "Power Plan
(Scheme) Deployments" on page 9.
If you disable this policy setting or do not configure it,
users can see and change this setting.
This setting is not supported on Windows XP client
computers.