Table 2. Power Plan (Scheme) Deployments (continued)
Policy settings
Critical battery alarm level (DC)
Critical battery alarm action (AC)
Critical battery alarm action (DC)
Global Power Setting
Global Power Setting policies enables you to configure global power settings.
To configure Global Power Setting policies, do the following:
• For Windows XP client computers (ADM and ADMX files)
Description
Specifies the percentage of battery capacity remaining
that triggers the critical battery alarm action.
If you enable this policy setting, you must enter a numeric
value (percentage) to set the battery level that triggers
the critical notification.
Note: The value should be lower than the level specified
by Low battery alarm level.
To set the action that is triggered, see the critical battery
alarm action (AC) policy setting in Table 2 "Power Plan
(Scheme) Deployments" on page 9.
If you disable this policy setting or do not configure it,
users can see and change this setting.
This setting is not supported on Windows XP client
computers.
Specifies the action that the Windows operating system
takes when battery capacity reaches the critical battery
alarm level.
Possible actions include:
• Do nothing
• Sleep
• Hibernate
• Shut down
This setting is not supported on Windows XP client
computers.
Specifies the action that the Windows operating system
takes when battery capacity reaches the critical battery
alarm level.
Possible actions include:
• Do nothing
• Sleep
• Hibernate
• Shut down
This setting is not supported on Windows XP client
computers.
.
Chapter 3
Working with Active Directory and ADM or ADMX files
29