HP Xw6200 - Workstation - 2 GB RAM Installation Manual page 8

Installing on threaded hole racks
NOTE: This product must be mounted in the middle of a 4U space. Use the template in Mounting Aid
in this document to determine a 4U space and mark the center.
1. Remove the three pins from the rear slide mounting bracket using a flat blade screwdriver (1).
2. Remove the three pins and two nuts from the front slide mounting bracket (2).
3. Attach the rear slide mounting bracket to the rear rack column using screws provided by your rack
manufacturer (3).
4. Attach the front slide mounting bracket to the front rack column using screws provided by your rack
manufacturer (4).
5. Adjust the rear slide (5) if necessary. Refer to Step 3 for details.
Figure 5
6. Continue with Step 4—Mounting into a rack.
8 Sliding rack mount kit installation
Installing on threaded hole racks
ENWW