HP
400 Workstations and HP xw4000 Workstation series
1.
Remove the front bezel from the workstation to access the optical bays.
a.
b.
Figure 2
2.
Install four (supplied) M3 x 5mm screws (black) in the lower four mounting holes.
3.
Install the DX115 case in the optical drive bay using the quick release system.
4
CRU Dataport DX115 kit installation
Lift the tab
.
Pivot the bezel to disengage the lower edge
Removing the front bezel
.
2
ENWW