HP D5970A - NetServer - LCII Guía Del Usuario page 19

Chapter 2
7. Rotate the knob to the "Closed" position (counter clockwise position).
See Figure 2-3.
8. Install the Netserver back into the rack and secure it to the rack.
Refer to the instructions in Chapters 7, 8, or 13 (depending on the rack
type) to install the chassis back into the rack.
NOTE Some rack options do not require removing the HP Netserver
from the rack to remove or replace the top cover.
Opening and Closing the HP Netserver
Figure 2-3. Replacing the Top Cover
B
A
13