Attach Data Cables To The Server - HP D5970A - NetServer - LCII Reference Manual

Chapter 3
HP 6-Port Hub
with GBICs
Figure 3-2. Overview of Data Cabling of the HP NetServer LXr 8500 to the
NOTE
The configuration in Figure 3-2 requires 2 UPS (power
supplies) and 2 PDU (power strip) units at both 208 V and at
230/240 V.
For more information on data cabling with the Rack Storage/12FC, see the HP
Rack Storage/12 FC Installation Guide.

Attach Data Cables to the Server

1. Locate SCSI connections, label both ends of the SCSI cables, and connect
one end of each one to the server. Tighten captive screws on SCSI
connectors to secure the cable connector to the server connector.
30
Procedure for Connecting and Routing Cables to the LXr 8500
HP Rack Storage/12FC
with GBICs
HP Rack Storage 12
HP Rack Storage/8
Rack Storage/12FC
HP NetServer
Lxr 8500