Cover 1; Cover 2; Cover 3 - HP D7171A - NetServer - LPr User Manual

Chapter 3
After unsecuring brackets, pull the NetServer forward from the rack until the
lockout device engages with a click.
CAUTION
The NetServer covers are heavy. Support them as you remove
them, and allow room to move them away from the NetServer
and for storage when removed from the NetServer.

Cover 1

Remove cover 1 by unscrewing the thumbscrew and pulling the cover forward to
disengage it. Lift it up and away from the chassis (see Figure 3-6).

Cover 2

Remove cover 2 by supporting it with your hand, then unscrewing the
thumbscrew and pulling the cover forward to disengage it. Lift it away from the
chassis (see Figure 3-6).

Cover 3

Remove cover 3 by supporting it with your hand, then unscrewing the
thumbscrew. Pull the cover forward to disengage it and catch it as it falls away
from the chassis (see Figure 3-6).
14
Removing and Replacing Covers