Attaching The Front Bezel Adapter - HP D7171A - NetServer - LPr Installation Manual

Chapter 3
10. Plug the HP NetServer's power cable and all available data cables into the
back of the NetServer.

Attaching the Front Bezel Adapter

The front bezel adapter fits the front bezel properly in the Comaq rack. Attach
the front bezel adapter by pushing the connectors on the adapter into the
corrosponding holes on the front bezel as shown in Figure 3-17.
Figure 3-17. Attaching the Front Bezel Adapter
28
Rack-Mounting the HP NetServer
Front Bezel Adapter