Chapter 2
Attaching the Column Adapters and Slides
1. Pull the anti-tip foot forward out of the bottom of the rack.
See Figure 2-6 for the anti-tip foot location.
2. Align the left HP column adapter to the left front column as shown in
Figure 2-5.
3. Match the column adapter holes (2nd & 14th) to the marks on the front
column and place the column adapter mounting holes behind the column
face. See Figure 2-5.
4. With the column adapter held in position, insert two screws (M5) through
the holes in the column into the captive nuts on the column adapter. See
Figure 2-5.
5. Repeat Steps 2 through 4 for the column adapter on the right front column.
Left
Front
Column
Adapter
Bottom of
HP NetServer
Figure 2-5. Mounting Column Adapter to Front Columns
Slide Mount
Rack Mounting the HP NetServer
14th Hole
From Bottom
Column
Adapter
2nd Hole
From Bottom
13