8-2. Cleaning the control box air inlet ports
8-3. Draining the oil
8-4. Cleaning the eye guard
8-5. Checking the needle
8-6. Lubrication
Carry out the lubrication referring to "3-12. Lubrication".
Use a vacuum cleaner to clean the filter in the air inlet ports
(2) of the control box (1) at least once a month.
2309B
1. Remove and empty the waste oil container (1) whenever
it is full.
2. After emptying the waste oil container (1), screw it back
into its original position.
* Check that the felt (2) is inside the oiler (1).
2457B
Wipe the eye guard clean with a soft cloth.
NOTE:
Do not use solvents such as kerosene or thinner to clean
the eye guard.
2310B
Always check that the tip of the needle is not broken and
also the needle is not bent before starting sewing.
2311B
KE-430F, BE-438F
8. MAINTENANCE
58