Type 1--Locating And Mounting The Slides - HP LC2000r - NetServer - 128 MB RAM User Manual

Chapter 8

Type 1--Locating and Mounting the Slides

Type 1--Locating the Slides
For Type 1, see Figure 8-7. All four mounting brackets on the slides attach
behind the outside faces of the columns. Use the template (or if you no longer
have it, count) and mark the 20th and 22nd holes on the outside faces of each
column. These holes correspond to the bottom hole of the eighth EIA unit (and
the middle hole of the 7th EIA unit) above the unit under the server.
Figure 8-7. Locating the Slides for the Type 1 Rack
50
Mounting the NetServer in a Rack