Using Manual Feed Mode
If you select Manual Feed in the Source option in your software application, you can manually load a
sheet of print material in the tray. Manually loading print material can be helpful when you want to
check the print quality after each page is printed. Use the manual feed mode to print transparencies,
labels, envelopes, or postcards.
NOTE:
Always load only the print materials specified in
jams and print quality problems.
NOTE:
Flatten any curl on postcards, envelopes, and labels before loading them into the tray.
To use the manual feed mode:
1. Load a sheet of print material in the paper tray with the side to be printed on facing up.
Adjust the paper length and width guides against the print material without bending it.
2. To print a document in Manual Feed mode, you must select Manual Feed for Source from the
software application, and then select the appropriate paper size and type. For details, see
"Paper
Tab".
3. Press
on the printer's operator panel to start feeding.
Printing starts.
NOTE:
If you don't press the button after a pause, the paper will be automatically fed into
the printer.
"Paper Specifications"
to avoid paper