Solving Print Quality Problems; Print Quality Checklist; Printing Quality Problems - Dell 1110 - Laser Printer B/W User Manual

When you are using
Window 98, the
illustrations print
incorrectly in Adobe
Illustrator.

Solving Print Quality Problems

Print Quality Checklist

Print quality problems can be resolved by following the checklist below.

Redistribute toner in the toner cartridge (see

Clean the inside of the printer (see

Adjust the print resolution from the printer properties window (see

Ensure that the Toner Save mode is off (see

Clear general printing problems (see

Install a new toner cartridge and check print quality (see

Printing Quality Problems

The inside of the printer may be dirty or improper paper loading may reduce print quality. See the
table below to clear the problem.
Condition
Light or faded print
The file may have blank pages.
Some parts, such as the controller
or the board, may be defective.
The setting in the software
application is wrong.
Suggested Solutions
If a vertical white streak or faded area appears on the page:
• The toner supply is low. You may be able to temporarily extend the life of
the toner cartridge. See
print quality, install a new toner cartridge.
Check the file to ensure that it does not
contain blank pages.
Contact a service representative.
Print the document by selecting Download
as Bit Image in the Advanced Options
window of Graphics properties.
"Redistributing
"Cleaning the Interior").
"Graphics Tab").
"Solving General Printing
"Redistributing
Toner").
"Graphics Tab").
Problems").
"Replacing the Toner Cartridge").
Toner". If this does not improve