Dell 1110 - Laser Printer B/W User Manual page 66

Paper does not feed
into the printer.
Printing is
extremely slow.
Half the page is
blank.
The paper keeps
jamming.
The printer prints,
but the text is
wrong, garbled, or
incomplete.
Pages print, but are
blank.
The printer is malfunctioning.
Paper has not been loaded
correctly.
There is too much paper in the
tray.
The paper is too thick.
The job may be very complex.
If you are using Windows 98/Me,
the Spooling Setting may be set
incorrectly.
The page layout is too complex.
The page orientation setting may
be incorrect.
The paper size and the paper size
settings do not match.
There is too much paper in the
paper tray.
An incorrect type of paper is being
used.
There may be debris inside the
printer.
The printer cable is loose or
defective.
The wrong printer driver was
selected.
The software application is
malfunctioning.
The toner cartridge is defective or
out of toner.
Check the LEDs on the operator panel to
determine if the printer is indicating a
system error.
Remove paper from the tray and reload it
correctly.
Remove excess paper from the tray.
Use only paper that meets the specifications
required by the printer.
Reduce the complexity of the page or try
adjusting the print quality settings.
The maximum print speed of the printer is
14(A4) or 15(Letter) pages per minute.
From the Start menu, choose Settings and
Printers. Right-click Dell Laser Printer
1110, choose Properties, click the Details
tab, and then choose the Spool Settings
button. Select the desired spool setting.
Simplify the page layout and remove any
unnecessary graphics from the document.
Change the page orientation in your
application.
Ensure that the paper size selected in the
print settings matches the paper in the tray.
Remove excess paper from the tray.
If printing on special materials, use the
manual feed mode.
Use only paper that meets the specifications
required by the printer. See
Specifications".
Open the front cover and remove the
debris.
Disconnect the printer cable and reconnect.
Try a print job that you have already
printed successfully. If possible, attach the
cable and printer to another computer and
try a print job that you know works. Finally,
try a new printer cable.
Check the application's printer selection
menu to ensure that your printer is
selected.
Try printing a job from another application.
Thoroughly shake the toner, if necessary.
See "Redistributing Toner".
If necessary, replace the toner cartridge.
"Paper