Table of Contents
Advertisement
To change ACL rules:
1. Click
The Add Access Rule Page contains the following fields:
Field
Profile ID
Source ID
TCP Source Port
TCP Flag Mask
Access ID
Type
Source IP Address
TCP Flag
Source Port
Ports
Action
Time Range
. The Add Access Rule Page opens:
Figure 8-21 Add Access Rule Page (IP based ACL)
Description
Displays the Profile ID to which the rule is being added to.
Displays the source IP address
Displays The TCP Source Port
Indicates if TCP flag mask is active.
Defines the Access ID
Displays the profile type (IP based).
Displays the source IP address.
Defines the indicated TCP flag that can be triggered.
Displays the TCP source port.
Defines the ports or LAGs on which the access profile will work.
Defines the action to be taken The possible values are:
Permit — Forwards packets if all other ACL criteria are met.
Deny — Drops packets if all other ACL criteria is met.
Rate Limiting — Rate limiting is activated if all other ACL criteria are met.
Change 1P priority — VPT (CoS) value is changed if all other ACL criteria is met.
Replace DSCP — Reassigns a new DSCP value to the packet if all other ACL
criteria are met.
Specifies whether the access rule is time-based.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
188
Advertisement
Table of Contents
