Table of Contents
Advertisement
Field
Speed
Flow Control
Learning
2. Define the Unit, From Por or From LAG t, To Port or To LAG, State, Speed, Flow Control, and Learning fields.
3. Click
Description
Enabled — Indicates that the interface is currently receiving and transmitting traffic.
Disabled — Indicates that the interface is currently not receiving and not transmitting traffic.
This is the default value.
Defines the configured rate for the interface. The port rate determines what speed setting options
are available. The possible field values are:
10M/Full — Indicates the interface is currently operating at 10 Mbps and full duplex mode.
10M/Half — Indicates the interface is currently operating at 10 Mbps and half duplex mode.
100M/Full — Indicates the interface is currently operating at 100 Mbps and full duplex
mode.
100M/Half — Indicates the interface is currently operating at 100 Mbps and half duplex
mode.
1000M/Full — Indicates the interface is currently operating at 1000 Mbps and full duplex
mode.
Auto —Indicates the interface is automatically configured to the fastest network traffic the
interface can manage.
Defines the flow control scheme used for the various port configurations. Interface configured
for full-duplex use 802.3x flow control, half-duplex interfaces use backpressure flow control,
and Auto interfaces use an automatic selection of the two. The default is Disabled.
Defines whether MAC address learning is enabled on the ports. The possible field values are:
Enabled — Enables MAC address learning on the interface. If MAC address learning is
enabled, the source and destination MAC address are recorded in the Forwarding Table.
(This is the default value)
Disabled — Disables MAC address learning..
. The port configuration is saved, and the device is updated.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
32
Advertisement
Table of Contents
