Connect The Usb Cable - Brother ImageCenter„ ADS2000 Quick Setup Manual

USB
5

Connect the USB cable

a
Connect the USB cable to the USB port
marked with a
Connect the cable to your computer.
b
The installation will continue automatically.
Multiple screens will appear during the
installation.
Important
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
c
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
4
symbol on your machine.
6
Finish and restart
a
Click Finish to restart your computer.
After restarting the computer, you must log on
with Administrator rights.
Note
If an error message appears during the software
installation, run the Installation Diagnostics
located in (Start)/All Programs/Brother/
ADS-2000.
b
The following screens will appear.
• When the Software Update Setting screen
appears, choose the software update setting
you want and click OK.
• When the Brother Product Research &
Support Program starts up, follow the
on-screen instructions.
Note
Internet access is required for the software
update and the Brother Product Research &
Support Program.
The installation is now
Finish
complete.
Now go to
Proceed to Install Optional Applications on
page 7.
®
Windows