Brother ImageCenter„ ADS2000 Quick Setup Manual page 5

USB
For USB interface users
3
Before you install
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
Note
For Mac OS X 10.5.0 to 10.5.7 users, upgrade to
Mac OS X 10.5.8 - 10.7.x before installation.
4
Connect the USB cable
Important
• DO NOT connect the machine to a USB port on
a keyboard or a USB hub.
• Connect the machine directly to your
Macintosh.
a
Connect the USB cable to the USB port
marked with a
Connect the cable to your computer.
(Mac OS X 10.5.8 - 10.7.x)
symbol on your machine.
5
Install MFL-Pro Suite
a
Put the supplied installer DVD-ROM into your
DVD-ROM drive.
b
Double-click the Start Here OSX icon to install.
c
Please follow the on-screen instructions. After
the installation, the Brother software will search
for the Brother device. This will take a few
moments to complete.
d
Choose your machine from the list, and then
click OK.
e
When this screen appears, click Next.
Macintosh
5