Configuring.additional.hard.drives - D-Link DNS-1100-04 Product Manual

Section 4 - Getting Started
Configuring Additional Hard Drives
You.can.install.up.to.four.hard.drives.in.the.ShareCenter®.Pro.1100..The.drives.can.be.individually.configured.and.configured.
into.a.RAID.volume..Once.a.new.drive.is.installed,.a.volume.will.be.created.and.formatted.according.to.your.specifications..
Once.the.hard.drives.are.installed.in.the.ShareCenter®.Pro.1100,.the.drives.can.be.formatted.and.configured.
Step 1:
Install.your.additional.hard.drives.as.detailed.in."Installing.Hard.Drives".on.page.8.
Step 2:
Open.a.web.browser.and.go.to.the.IP.Address.displayed.on.the.ShareCenter®.Pro's.
OLED.screen,.and.log.in.to.the.Web.UI.
If.you.cannot.see.the.IP.information.on.the.top.OLED.screen,.press.the.OLED.button.
to.the.right.of.the.display.until.it.appears.
Note:.For.more.information.on.connecting.to.the.Web.UI,.please.refer.to."Using.
the.Setup.Wizard".on.page.19..
D-Link ShareCenter Pro 1100 User Manual 26