Setting Of The Ub-R03 - Epson C32C824461 - UB R03 Print Server Technical Reference Manual

Setting of the UB-R03

Set the UB‐R03 according to the following steps.
1
Turn the power supply of the TM printer off, connect the computer to the
USB connector (Parameter Setting) with the USB cable.
2
Set paper in the TM printer and turn on it.
When the first connecting to the setting computer, the "Installing device driver software"
message is displayed, then the hardware setup is started automatically. Wait about one or
two minutes until the setting is completed. (For Windows Vista)
3
Boot the TMNet WinConfig V3 in the computer for setting.
Select [All Programs]-[EPSON TMNet WinConfig V3]-[TMNet WinConfig].
28