Epson C32C824461 - UB R03 Print Server Technical Reference Manual page 35

• Set using Automatic Private IP Addressing(APIPA)
• Set using PING
• Subnet Mask
• Default Gateway
11
After setting the TCP/IP , click the [OK] button.
12
The confirmation dialog box is displayed. Click the [Yes] button.
13
The "Password" dialog box is displayed. Click the [OK] button.
14
The contents of the setting are transmitted to the UB-R03. It takes about
30 seconds to display the completion window. Click the [OK] button.
15
Confirm the setting on each window of the TMNet WinConfig V3.
16
When the setting is completed, remove the USB cable.
: If the value cannot be acquired from the DHCP server, the IP
Address is set automatically by checking the Set using
Automatic Private IP Addressing (APIPA) check box. The
Subnet Mask and the Default Gateway is set the setting value.
: When setting the IP Address using the PING command from
the computer of the network, check the [Set using PING]
checkbox.
: Set the Subnet Mask.
: Set the Default Gateway.
Chapter 2 Installation
35
2