Fujitsu PenCentra 130 User Manual page 98

Backlight Control
VGA Controller
VRAM
PC Card Slots
Modem
Integrated Interfaces
Infrared
Audio
A-2 Appendix
PenCentra 130 Specifications (Continued)
Color Reflective Display (indoor/outdoor):
Low-Medium-High-Off (via hotpad)
Color Transmissive Display (indoor only):
Very Low-Low-Medium-High (via hotpad)
The backlight control defaults to last setting used.
16-bit with hardware acceleration
2 MB SDRAM
Interface Specifications
• Two Type-II
• PCMCIA version 2.1
• 5 V/3.3 V, 500 mA maximum power
• "Radio Ready" for WAN PC Card radios
• Rockwell internal 56 Kbps (V.90/K56 Flex) controllerless
data/fax modem (North America only)
• RJ-11 jack on top of system
• Ring wakeup (internal or PC Card modem)
• USB-Host (Type-A connector)
5 V, 500 mA maximum current
• PS/2-style keyboard (full-size, 6-pin DIN connector)
5 V, 500 mA maximum current
• RS-232C serial port (full-size DB-9 connector)
Note that Pin 9 on this serial port has 5 V, 500 mA
maximum current support; Pin 9 on the optional docking
station serial port does not support 5 V.
• RJ-11 modem jack
• DC Power
IrDA version 1.1 (FIR, 4 Mbps)
• PCM voice recording and playback (half-duplex)
• Internal microphone and speaker
• Microphone and headphone jacks (3.5 mm)