Insert Disc; Turn Dvd Player On - Silvercrest DVT-480 User Manual

Notes
• The average life span of the battery is 1 year.
• Replace an exhausted battery with a battery of the same type
only (button cell CR2025 3 V).
• During long periods of non-use remove the battery from the
battery compartment.
• Also, observe the safety instructions for handling batteries on
page 10.
10.4 Insert disc
• Press OPEN (6) in the direction
of the arrow to open the disc
compartment.
• Insert the desired disc with the
label up. 8 cm and 12 cm discs
can be inserted.
• Press the disc down in the center, until it clicks into position.
• Close the compartment by pressing the cover down until it
locks into place.
10.5 Turn DVD player on
Slide the ON/OFF switch (21) to the ON position. The power
indicator (13) lights up red. The inserted disc is loaded. READ is
shown on the display. The disc starts automatically. Depending on
the type of disc, the following actions will take place:
DVD
Video CD
Audio CD
MP3/WMA
CD
20
Usually an initial scene is played and afterwards
the main DVD menu is displayed.
A folder and a track overview are displayed. The
following video files can be played: MPEG2,
MPEG4 (AVI), VOB, DAT.
The music is played and, if available, a track
overview is displayed.
A folder and a track overview are displayed.