Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Silvercrest SDV-702
Summary of Contents for Silvercrest SDV-702
- Page 1 SDV-702 User Manual English...
-
Page 3: Introduction
1 Introduction Thank you for choosing this SilverCrest SDV-702 portable 7“ DVD player. In order to be able to use this product to its fullest extent, we recommend reading these instructions before using this product for the first time, even if you are familiar with electronic devices. Pay particular attention to the chapter Important Safety Instructions on page 7. Keep this manual for future reference. If you sell or pass the equipment on, hand over this user manual also. 2 Copyright Without our permission, contents of this user manual may not be reproduced, copied (or otherwise duplicated in any way), installed in a search engine, or translated into other languages. 3 Declaration The SilverCrest SDV-702 DVD player and the supplied accessories comply with the basic requirements and relevant regulations of EMC directive 2004/108/EC, as well as the low-voltage directive 2006/95/EC. The equipment fulfills the demands of Standard EN 50332 (parts 1 and 2) concerning a max. sound pressure level of... -
Page 4: Manufacturer Information
4 Manufacturer Information JNC Datum Tech GmbH Benzstraße 33 71083 Herrenberg Germany For more information visit: www.mysilvercrest.de... -
Page 5: Table Of Contents
5 Contents 1 Introduction ................3 2 Copyright ................3 3 Declaration ................3 4 Manufacturer Information .............4 5 Contents .................5 6 Important Safety Instructions ..........7 7 Package Contents ...............10 8 Parts..................12 8.1 DVD player ................12 8.2 Monitor .................13 8.3 Remote control ..............14 9 Power Supply ...............15 9.1 Mains power ................15 9.2 Car adapter ................15 9.3 Battery operation ..............15 10 Installation . - Page 6 14 Disc Functions ..............24 14.1 Navigation ................24 14.2 Disc playback ...............25 14.3 Stop playback ..............26 14.4 Pause ...................26 14.5 Forward / Rewind ..............26 14.6 Search mode ...............26 14.7 Slow motion .................27 14.8 Step ..................27 14.9 Zoom ..................27 14.10 Change angle ..............28 14.11 Numeric buttons ..............28 14.12 Go to function ..............29 14.13 Repeat .................30 14.14 Repeat section .
-
Page 7: Important Safety Instructions
6 Important Safety Instructions Please read and observe the safety instructions. General • The packaging materials are not toys. Do not let children play with the plastic packaging materials that come with this product. Danger of suffocation. • Do not allow children to operate electrical devices unsupervised. • CAUTION! LASER RADIATION HAZARD! This DVD player is a class 1 laser product. This equipment works with a bundled laser beam. When the product is disassembled, or if it has a defective safety mechanism, the laser beam can cause eye damage. Power supply • Connect the power adapter only to a 100-240V~50/60Hz wall outlet. Ensure the wall outlet is in close proximity to the equipment and is accessible at all times. • Route the cables in such a way that nobody can trip over them. • Ensure that you do not route cables over edges; do not kink the cable. • Disconnect from mains power supply during lightning. • When disconnecting, do not pull the cable, always hold the plug. Operating conditions • Avoid moisture and dripping or splashing water. • To avoid electric shock, do not submerge the product in water or other liquids. • Do not place objects filled with water on or near the unit. •... - Page 8 • If you move the equipment from a cold place to a warm place, humidity can condense on the lens. In this case leave the equipment switched off for several hours to adapt to the current temperature. • Do not place heavy articles on top of the equipment. Do not touch the display. • Do not press on the surface of the display. Avoid contact with sharp or pointed objects. • Do not expose the equipment to excessive heat. Do not place it in close proximity to heat sources, such as radiators or ovens. • Ensure that there is sufficient ventilation. If you set up the equipment on a shelf, keep a minimum distance of 10 cm between the product and other objects and the shelf walls. • Do not set up the unit in close proximity to devices which are sensitive to disturbances by magnetic sources (e.g. tape decks). • Do not place open sources of fire, e.g. a burning candle, on top or beside the equipment. • Do not expose the equipment to direct sunlight. Operation • Do not move the DVD player during playback; this can damage the inserted disc. • Remove the disc only after it has completely stopped. • Remove the disc before moving the equipment. Switch the equipment off and disconnect from mains power supply. • Please note that even when the equipment is switched off the power and car adapters use a small quantity of electricity. Operation in vehicles •...
- Page 9 active headrests must not be covered, blocked, obstructed, or weighted down by the headrest mounting plate. Also read the vehicle documentation and get advice from specialists. • Please note that an excessive use of the product can lead to the exhaustion of the car battery. • Please note that temperatures inside vehicles can reach extreme levels in summer and winter. Do not store the DVD player in your vehicle and do not store it in places with temperatures below 0°C or higher than 40°C. • When routing the cables inside the vehicle ensure that they do not obstruct the driver’s ability to operate the vehicle. • Connect the 12V car adapter to a well accessible 12V cigarette lighter jack or 12V power supply jack. • During installation, ensure that the cables are not jammed or squeezed. • When attaching the product to the headrest ensure that is does not obstruct the driver. Batteries • CAUTION! There is a danger of explosion from the inappropriate handling of batteries. Replace batteries with the same type only. • A swallowed battery can be lethal. Keep batteries and remote control out of reach of children. Immediately ask for medical assistance if a battery is swallowed. • The supplied battery may not be charged or re-activated by other means, disassembled, thrown into fire, or short-circuited. • Remove exhausted batteries from the remote control and the DVD player. Remove batteries from the remote control and the DVD player if you will not use it for an extended period of time. • Do not expose batteries to extreme temperatures. Do not place the remote control and the DVD player on heaters. Leaked battery acid can cause damages.
-
Page 10: Package Contents
Headphones • CAUTION! Avoid listening with headphones at a consistently high volume. Danger of permanent hearing damage! • Ensure that children do not turn the volume too high. • The unit may only be used with the supplied headphones. In case of malfunctions • In case of damages to the cable, power adapter, car adapter, or the unit itself, immediately disconnect from mains power supply. • Do not use the equipment if there are visible damages to the casing, power adapter, or mains cable. Repairs to casing, power adapter, and mains cable are to be performed by qualified technical personnel only. • Do not insert objects into the equipment. Danger of electric shock. • Immediately disconnect from mains power supply if liquids or foreign objects have entered the device. Have the unit examined by qualified technical personnel before operating it again. 7 Package Contents 1. DVD player (1x) 2. Monitor (1x) - Page 11 3. 12V power adapter 4. 12V car adapter (1x) (input 220V) (1x) 5. Head rest holder (2x) 6. Remote control with battery (1x) 7. Connecting cable (1x) 8. Earphones (2x) 9. User manual (1x)
-
Page 12: Parts
8 Parts 8.1 DVD player LCD display Rubber cover USB port VOLUME Volume control DC OUT 7-12 V Power output Earphones jack VIDEO IN/ OUT Jack for video signals AUDIO IN/OUT Jack for audio signals OPTICAL OUT Output for optical audio signals Power indicator (lights up orange during operation) 10 POWER ON OFF ON/OFF switch DVD player 11 DC IN 12V Input 12V power adapter (220V input) and 12V car adapter for DVD player Right speaker 13 AUDIO DVD: audio language; other media: select stereo / mono L / mono R Search forward Search backward 16 MODE Mode; image settings; press and hold for 2 seconds: turn off display Infrared sensor Next title, next chapter Previous title, previous chapter Stop playback Play/pause... -
Page 13: Monitor
Left speaker 23 OPEN Open disc compartment Battery compartment DVD player 8.2 Monitor LCD display 26 MODE Access image settings 27 M+ Change settings 28 M- Change settings Earphones jack 30 VOLUME Volume control Power indicator (lights up orange during operation) 32 POWER ON OFF ON/OFF switch monitor Right speaker Left speaker 35 DC IN 12V Power connection 36 AUDIO IN Input jack for audio signals 37 VIDEO IN Input jack for video signals... -
Page 14: Remote Control
8.3 Remote control 38 SETUP Setup menu 39 AUDIO Audio language Infrared transmitter 41 SUBTITLE Subtitles 42 ANGLE Camera angle 43 PROGRAM Program 44 OSD On-screen-display information 45 SEARCH Search function Navigate right 47 STOP Stop playback 48 NEXT Next title 49 STEP/ Step / slow motion SLOW 50 FWD Search forward 51 CLEAR Clear input 52 TITLE Display DVD title... -
Page 15: Power Supply
9 Power Supply 9.1 Mains power • Mains power operation: The power adapter of the DVD player is designed for 100-240V~50/60Hz. • Connect the plug of the power adapter to DC IN (11) on the DVD player. • Connect the power adapter to a well accessible wall outlet. 9.2 Car adapter • Vehicle operation: The car adapter allows you to operate the DVD player in a vehicle. The car adapter is designed for a 12V vehicle system. • Connect the car adapter to DC IN (11) on the DVD player. • Connect the car adapter to a well accessible 12V cigarette lighter jack or 12V vehicle power supply output jack. The car adapter LED lights up red during operation. 9.3 Battery operation • The DVD player can be operated with 6 Mignon type AA batteries. We recommend using rechargeable batteries with amperage of 2300 mAh in order to ensure a long operating time. With these batteries, an operating time of up to 2 hours is possible. - Page 16 Insert batteries: • Slide the cover of the battery compartment (24) to the side. • Insert the batteries in accordance with the polarity markings in the battery compartment (24) and close the cover again. Notes: • The monitor has no battery compartment. • The DVD player can be operated with batteries independently of the monitor. • The operating time depends on the use of the DVD player. • Use rechargeable batteries with amperage of 2300 mAh. • Remove the batteries from the DVD player if not in use. • Rechargeable batteries cannot be charged while inserted in the DVD player. • Observe the disposal instructions for batteries on page 47. • Also observe the safety instructions for handling batteries on page 9.
-
Page 17: Installation
Installation 10.1 Set up the player • Place your DVD player on a sturdy, even surface. • Fold out the support on the rear of the unit and adjust for the best viewing angle. Note: • For vehicle operation read the chapter Mounting on page 21. 10.2 Connect to power supply For power supply, use the power adapter, car adapter, or batteries (→ Power Supply, page 15). 10.3 Insert battery (remote control) • Open the battery compartment (55) at the bottom of the remote control. Press and hold the locking mechanism on the side and pull out the battery holder at the same time. RELEASE RELEASE • Insert the supplied battery, making sure to match the +symbol on the battery with the same symbol in the battery compartment. • Push the battery support holder back into the battery compartment (55). Notes: •... -
Page 18: Insert Disc
10.4 Insert disc • Press OPEN (23) in the direction of the arrow to open the disc compartment. • Insert the desired disc with the label up. 8 cm and 12 cm discs can be inserted. • Press the disc down in the center, until clicking into position. • Close the compartment by pressing the cover down until it locks into place. 10.5 Turn DVD player on Slide the ON/OFF switch (10) to ON position. The power indicator (9) lights up orange. The inserted disc is loaded. READ is shown on the display. The disc starts automatically. Depending on the type of disc, the following actions will take place: Usually an initial scene will play and afterwards the main DVD menu is displayed. Video CD A folder and a track overview are displayed. The following video files can be played: MPEG1 (DAT), MPEG2 (DAT, VOB, MPG), MPEG4 (AVI, MP4). Audio CD The music is played and, if available, a track overview is displayed. MP3/WMA A folder and a track overview are displayed. Foto CD A folder and a file overview are displayed. Only JPEG files are displayed. 10.6 Remove disc and turn off DVD player • Press STOP (47) twice to stop disc playback. -
Page 19: Connections
• Close the compartment by pressing the cover down until it locks in place. • Slide the ON/OFF switch (10) to OFF position. The power indicator (9) turns off. Note: • If you open the cover during playback by accident, the rotating disc will stop. • Do not remove the disc while it is still rotating. Connections 11.1 Headphones • Press VOLUME (4) to set the DVD player to the lowest volume. • Connect the headphones connector to the jack (6) on the unit. • Press VOLUME (30) to set the monitor to the lowest volume. • Connect the headphones connector to the jack (29) on the monitor. Note: • Use headphones with an angled plug if the connecting cable is connected to the equipment at the same time. 11.2 Use external AV device for playback • Connect, for example, a TV set via an A/V cable (not supplied). • Connect the video and audio connectors to the VIDEO IN/OUT (7) and AUDIO IN/OUT OPTICAL OUT (8) jacks on the DVD player. •... -
Page 20: Display Signal Of Av Device
11.3 Display signal of AV device • With an A/V cable (not supplied) you can connect A/V equipment, such as an external DVD player. • Connect the video and audio connectors to the VIDEO IN/OUT (7) and AUDIO IN/OUT OPTICAL OUT (8) jacks on the DVD player. • Connect the RCA connector to the corresponding colour-coded jacks on your TV set. • Press MODE (16) on the DVD player and, using (15) or (14), select AV IN mode on the unit. • Now you will receive the signal of the external DVD player. 11.4 Connect digital amplifier • With an optical digital cable (not supplied) you can connect the DVD player to a digital amplifier. • Connect the digital cable to AUDIO IN/OUT OPTICAL OUT (8) on the DVD player and to the optical digital input of your amplifier. Note: • Depending on the connected amplifier, select SPDIF/RAW or SPDIF/PCM in the setup menu under Audio Setup (page 40). -
Page 21: Mounting
Mounting • Mount the DVD player with the headrest holder to a headrest in your vehicle. • CAUTION! Do not impair the proper functioning of airbags and headrests. • Place the mounting plate with the foam material side against the headrest and place the straps over and under the head rest. • Ensure that the fastener points are able to lock the DVD player and monitor properly in place. • Tighten the straps firmly and close the Velcro fasteners. • Insert the DVD player from above into the mounting plate. Push the unit downward until it locks into place. • Turn DVD player and monitor off. • Connect DVD player and monitor with the supplied connecting cable. • Connect DC OUT in such way to DC OUT 7-12V (5) on the right of the DVD player so that the jacks VIDEO OUT and AUDIO OUT fit into the corresponding sockets on the equipment. -
Page 22: Basic Operation
• Connect DC IN to the socket DC IN 12V (35) on the left of the monitor so that the jacks VIDEO IN and AUDIO IN fit into the corresponding sockets on the monitor. • Connect the car adapter to a well accessible 12V cigarette lighter jack or 12V vehicle power supply output jack. The car adapter LED lights up red during operation. Note: • Observe the safety precautions for in-car operation on page 8. • Ensure that the cables do not disturb the driver’s ability to operate the vehicle. Basic Operation 13.1 Use remote control • The key functions depend on the inserted disc (e.g. DVD, Audio CD, MP3/WMA CD, Picture CD). Not all functions are supported by each disc. This is not a malfunction of the device. • The following functions are operated with the remote control, if not indicated differently. • The numeric buttons (54) have dual functions. Press SHIFT (57) to toggle between numeric buttons and the function keys. After pressing SHIFT (57) the display briefly shows SELECT FUNC (function keys) or SELECT NUM (numeric buttons). Note: • Ensure that no objects obstruct the line between the infrared transmitter (40) of the remote control and the infrared sensor (17) on the unit. Other infrared devices can affect the functioning of the remote control. 13.2 Turn unit on and off •... -
Page 23: Select Mode
• To turn the unit off, slide the ON/OFF switch (10) to OFF position. • To turn the monitor on or off, slide the ON/OFF switch (32) to the corresponding position. The power indicator (31) lights up orange. 13.3 Select mode • Press MODE (16) on the DVD player to select a mode. You can select between the DVD player (AV OUT) and an external device (AV IN). 13.4 Image settings • You can adjust the image settings on the DVD player and on the monitor. • Press MODE (16) on the DVD player in order to display the options bar. Repeatedly press MODE (16) to access the image quality options. • Adjust the values with (15) or (14) on the unit. • Repeatedly press MODE (26) on the monitor to access the image quality options. Adjust the values with M- (28) or M+ (27) on the monitor. Note: • The window closes automatically if no setting is made within 5 seconds. Set the brightness level. Select a value for saturation. Select this aspect ratio if the unit is connected to 16:9 a screen with a 16:9 format. -
Page 24: Volume Control
13.5 Volume control • Set the desired volume on the DVD player with VOLUME (4) and with VOLUME (30) on the monitor. 13.6 Mute • Press MUTE (56) to mute the sound. MUTE is displayed. • Press MUTE (56) again to resume playback with sound. 13.7 Turn display off • Press and hold MODE (16) on the DVD player for 2 seconds to turn the display off. • Press any button to turn the display on again. Note: • You can turn off the display only with MODE (16) on the DVD player. • If the DVD player and the monitor are connected, the display of the monitor is not turned off, if you press and hold MODE (16) on the DVD player for 2 seconds. • You cannot turn off the monitor display with MODE (26) on the monitor. Disc Functions 14.1 Navigation The display shows the following icons: folder audio files image files video files... -
Page 25: Disc Playback
Use (67) / (46), (68) / (64) for navigation in folders, files, • and menus. • You can only select one folder / file at a time. • Press (66) to open a folder. All files in the folder are displayed. • Press (66) to play or view a file or to confirm your input. Note: • If a file name is longer than can be displayed in the window, only a part of the file name is shown. 14.2 Disc playback This unit can play the following disc formats: • Audio: Audio CD, MP3, WMA • Video: DVD Video, MPEG1 (DAT), MPEG2 (DAT, VOB, MPG), MPEG4 (AVI, MP4) • Others: JPEG DVD/Audio • The unit starts playback automatically. disc • If playback does not start, press PLAY/PAUSE (62) to play the inserted disc. Video files/ • After inserting the ABBA - SO LONG .MP3 MP3/WMA/... -
Page 26: Stop Playback
14.3 Stop playback DVD/Audio/ • Press STOP (47) once to stop playback. The MP3/WMA/ DVD player stores the current position. The display briefly shows PRE STOP. JPEG disc • Press PLAY/PAUSE (62) to continue playback. • Press STOP (47) twice to terminate disc playback. The display briefly shows STOP. • Press PLAY/PAUSE (62) to start playback from the beginning of the CD. Video files • Press STOP (47) once to stop playback. disc • Press PLAY/PAUSE (62) to start playback from the beginning of the CD. 14.4 Pause DVD/Audio/ • Press PLAY/PAUSE (62) to pause disc MP3/WMA/ playback temporarily. The display shows PAUSE. -
Page 27: Slow Motion
14.7 Slow motion DVD/Video • Press STEP/SLOW (49) to reduce the files disc playback speed. There are 6 speed settings available: 1/2, 1/3, 1/4, 1/5, 1/6, 1/7. • Press PLAY/PAUSE (62) to continue normal playback. Audio/MP3/ • Function not available. WMA/JPEG disc 14.8 Step DVD/Video • First press PLAY/PAUSE (62). files disc • Press STEP/SLOW (49) to display a frozen image. • Press STEP/SLOW (49) to step one frame ahead. • Press PLAY/PAUSE (62) to return to normal playback. • Press ZOOM (60) to enlarge or reduce frozen images. Audio/MP3/ •... -
Page 28: Change Angle
Audio/MP3/ • Function not available. WMA disc 14.10 Change angle DVD disc • Repeatedly press ANGLE (42) to select a viewing angle. • Note: This function is not supported by all DVDs. Audio/MP3/ • Function not available. WMA/ Video files/JPEG disc 14.11 Numeric buttons DVD/Audio/ • First press SHIFT (57) to activate SELECT NUM mode. MP3/WMA/ JPEG/ Video • With the numeric buttons (54), you can files disc directly select the number of the chapter / title or the file. Playback starts. • Press +10 (53) to select a multi-digit number. The display shows SELECT 10+. • Press a numeric button (0-9) to select a number between 10 and 19. •... -
Page 29: Go To Function
14.12 Go to function • Search for a title, chapter, or certain location. • Press SEARCH (45) during playback. Navigate with (68) / (64). • • Press SEARCH (45) to close the window. DVD disc • A window with input fields is displayed for title (TT), chapter (CH), and time (TIME). TT is the default setting. TIME • Press (66) and enter the desired title with the numeric buttons (54). Press (66) to confirm and start playback. The title is played in the preview window. • You can enter a chapter and a certain time (hours, minutes, seconds) in the same way. Audio/MP3/ • A window with input WMA/ Video fields for track (TRK) files disc and track duration (TRKTIME) is displayed. TRKTIME •... -
Page 30: Repeat
14.13 Repeat • Press REPEAT (58). • To turn the function off, press REPEAT (58), until REP CANCEL is displayed. DVD disc • You can repeat chapters and titles. The display will successively display REP CHAPTER, REP 1, and REP CANCEL. Audio disc • You can repeat tracks or the entire CD. The display will successively display REP 1, REP ALL, and REP CANCEL. MP3/WMA/ • You can repeat tracks, folders, or the entire Video files/ CD. The display will successively display REP JPEG disc 1, REP DIR, REP ALL, and REP CANCEL. 14.14 Repeat section DVD/Audio/ • Press A-B (59) during playback to specify the MP3/WMA/ beginning of a section. The display shows... -
Page 31: Program Playback
14.15 Program playback DVD disc • With an inserted DVD, PROG you can program up 1 -- : -- 5 -- : -- 9 -- : -- 13 -- : -- to 16 chapters in any 2 -- : -- 6 -- : -- 10 -- : -- 14 -- : -- 3 -- : -- 7 -- : -- 11 -- : -- 15 -- : -- desired order. -
Page 32: Display Information
14.16 Display information • During playback press OSD (44) once to display disc information. • Press OSD (44) again to fade the display out. DVD disc • Press OSD (44) once 00:02:09 2 39 to display title, chapter, and elapsed playing time. • Press OSD (44) 1 1ENG D 3 2 1 4 ENG twice to display audio language, subtitle, and angle. Audio/MP3/ • The current track 00 : 00 : 29 WMA/ Video number, total number files Disc of tracks, black loudspeaker (sound on), gray loudspeaker... -
Page 33: Display Subtitle
14.17 Display subtitle DVD disc • Press SUBTITLE (41) to change the subtitle language. All supported languages on the DVD are displayed successively. • Press SUBTITLE (41) until OFF is displayed to deactivate the subtitle language function. • Note: This function is only available if the DVD was recorded with multiple subtitle languages. Audio/MP3/ • Function not available. WMA/ Video files/JPEG disc 14.18 Select audio language DVD disc • Press AUDIO (39) to select the audio language for the DVD. • Note: This function is only available if the DVD was recorded with multiple audio languages. Audio/MP3/ • Function not available. WMA/ Video files/JPEG disc... -
Page 34: Access Menu
14.19 Access menu DVD disc • Press (61) oder MENU (69) during playback to open the DVD menu. • Press PLAY/PAUSE (62) to resume DVD playback. Video files/ • Press (61) during playback to display the JPEG disc title and folder overview. • The slideshow is terminated. Audio/MP3/ • Function not available. WMA disc 14.20 Rotate image JPEG disc Press (67) / (46) during image display to • rotate it in 90° increments. Press (68) / (64) during image display to • mirror the image horizontally/vertically. • Note: This function only changes the image display. The image is not saved. DVD/Audio/ •... -
Page 35: Setup Menu
Setup Menu 15.1 Access setup menu Press SETUP (38) to access the main menu of the DVD player. In the setup menu you can adjust the following settings: System setup Language setup Audio setup Video setup Digital setup Use (67) / (46), (68) / (64) to navigate in the setup • menu. • Press (66) to confirm a selection or input. Press SETUP (38) again, or select EXIT SETUP and confirm • with (66) to close the setup window. Notes: • Some settings are disabled during disc playback. Stop disc playback to enable the corresponding settings. -
Page 36: System Setup
15.2 System setup • Press SETUP (38) and select SYSTEM SETUP. SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT EXIT SETUP TV SYSTEM This setting concerns the TV output signal and depends on the connected equipment. In Europe mainly PAL is used. NTSC All DVDs are played in NTSC format. To play NTSC DVDs a connected TV set must be set-up accordingly. All DVDs are played in PAL format. AUTO The TV system is adjusted automatically, depending on the connected TV set. SCREEN SAVER Activate/deactivate screen saver. The screen saver is activated: • 60 seconds after pressing STOP (47). - Page 37 TV TYPE Select this option, if the equipment is connected to a screen in 4:3 format. Pan & Scan (PS) is a process to display videos on an output device without black bars. Parts of the image, which do not fit on the display, are omitted on the left and right. 4:3 LB Select this option if the equipment is connected to a screen in 4:3 format. Letter box (LB) is a process to display 16:9 videos on a 4:3 TV set. The missing image parts under and above the image are replaced by black bars. 16:9 The picture is displayed in full 16:9 size. Select this option if the equipment is connected to a screen in 16:9 format. PASSWORD The preset password is 0000. Press (66) and enter a new password with the numeric buttons (54) to change the password. Confirm with (66). Note: If you forget your password, you can deactivate the parental setting with 0000.
- Page 38 RATING Specify that certain DVDs can not be played, starting from a certain rating. There are eight different rating options. Select a rating option: • In order to set one of the options, select RATING in the setup menu. Press (68) / (64) to select a rating option. • • Press (66) to confirm. • Select PASSWORD in the setup menu. • Enter your password and press (66) to disable the RATING settings. • This sets the parental function. The DVD player will only play discs that correspond to the specified rating settings. Note: A corresponding rating must be stored on the DVD for the parental function to work. If this is missing on the DVD, the parental function cannot work. Disable parental setting: • Select PASSWORD in the setup menu. • Press (66) and enter your password with the numeric buttons (54). • Press (66) to confirm. • Now select the rating option ADULT in RATING. • The parental setting is disabled. All DVDs can be played. 1: KID SAFE Children’s films can be watched. All movies with a rating are disabled.
-
Page 39: Language Setup
6: R Restricted; not permitted for young people under 17 unless in the company of adults. 7: NC 17 No children; not permitted for young people under 17. 8: ADULT Only for adults. DEFAULT Reset to factory settings. EXIT SETUP Exit the setup menu. 15.3 Language setup • Press SETUP (38) and select your LANGUAGE SETUP. LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUB LANG MENU LANG EXIT SETUP Select the language for the DVD menu LANGUAGE (default: English). AUDIO LANG Select the language for the DVD audio (default: English). Available only if the inserted DVD is recorded with multiple languages. -
Page 40: Audio Setup
15.4 Audio setup • Press SETUP (38) and select AUDIO SETUP. AUDIO SETUP AUDIO OUT EXIT SETUP AUDIO OUT SPDIF/ Select this setting if no external equipment is connected. No digital signal is outputted. SPDIF/ Select this setting to output a digital signal if an audio decoder or amplifier with audio decoder is connected to the DVD player. Also read and observe the user manual of the connected equipment. SPDIF/ Select this setting to output a digital signal if a digital 2-channel amplifier is connected to the DVD player. Also read and observe the user manual of the connected equipment. EXIT SETUP Exit the setup menu. 15.5 Video setup • Press SETUP (38) and select VIDEO SETUP. VIDEO SETUP BRIGHTNESS CONTRAST... -
Page 41: Digital Setup
15.6 Digital setup • Press SETUP (38) and select DIGITAL SETUP. DIGITAL SETUP OP MODE DYNAMIC RANGE EXIT SETUP OP MODE LINE OUT Select this setting to limit the output signal. This setting is best suited for night operation, since the output volume is limited. This setting offers an optimal REMOD playback with less volume. The loud playback passages are absorbed and the quiet passages are played slightly louder. This setting is best suited during the day. The function is only possible with digital sound. DYNAMIC If you selected the option LINE OUT, you can set RANGE the limit of the output signal. If the playback is too loud or too quiet, you can absorb peak sections with this function and play quiet sections louder. Press (68) / (64) to select a value (OFF, 1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8, FULL) and press (66) to confirm. -
Page 42: Usb Device
USB Device 16.1 Connect USB device • The unit can play files, e.g. MP3’s, from a USB data storage device. • The unit supports USB 1.1. • Open the rubber cover (2) on the equipment. • Connect a USB device via the USB port (3). • Turn the unit on. The display shows READ. Notes: • If after turning the equipment on, a disc is inserted and a USB device is connected, only the CD is played. • If during USB playback a disc is inserted, the USB playback is stopped and disc playback starts. 16.2 File playback • After connecting the USB device, a folder and file overview, such as with an MP3 CD, are displayed. • The playback functions in USB mode are the same as in disc mode. 16.3 Disconnect data storage device • Slide the ON/OFF switch (10) to OFF position and disconnect the USB device. -
Page 43: Care & Maintenance
Care & Maintenance DVD player • Disconnect from mains power supply before cleaning. • Only use a dry, soft cloth for cleaning the device. • Do not use corrosive or abrasive cleaning agents. These may damage the surface of the device. Disc • If a disc has finger marks or dust on it, wipe off carefully from the center to the edge with a soft cloth. • Do not use anti-static cleaners or other cleaning agents to clean a disc. Troubleshooting If a problem arises, check the following list before taking the product for servicing. If you cannot solve a problem using the following information, try contacting the Hotline. Under no circumstances should you try to repair the equipment yourself. This will void your warranty. Problem Cause/Solution DVD player • Ensure that the mains plug is properly cannot be connected to the DVD player and the wall switched on. outlet. • Check your power supply. • Check the batteries. DVD player • Check whether the ON/OFF switch (10) is does not start in ON position. playback. - Page 44 • The parental settings prevent the playback of the inserted disc. Disable the parental function. • Condensation in the unit: Turn the DVD player on and wait until the moisture has evaporated. No Sound. No • Check the power supply. picture. • Check the volume setting. • Ensure that MUTE (56) is not activated. • Ensure that the A/V cable between the DVD player and external equipment is properly connected and that the A/V cable is not damaged. • Ensure that the display is not switched off. • Press any button to turn the display on. No picture on • Check whether the DVD player and the TV connected TV set are properly connected. set. • Check the TV settings. Distorted / cut • Press SETUP (38) to access the setup image. menu. • Check the display format in the setup menu under SYSTEM SETUP. Select TV TYPE.
-
Page 45: Technical Specifications
Technical Specifications General Dimensions DVD player 210 x 175 x 40mm (L x W x H) Dimensions monitor 210 x 175 x 31mm (L x W x H) Weight DVD player 710g Weight monitor 410g LCD screen diagonal 7” (17.8cm) Resolution 480 x 234 pixels Laser Class 1 Operating temperature 0° C to +40°C Operating humidity 20% to 80% Storage temperature -10° C to +60°C DVD Player Input DC IN 12V Power consumption ≤ 15W Max. power output < 5W Max. headphones output 135mV Regional code free Monitor Input DC IN 12V Power consumption ≤... - Page 46 Remote control Type Infrared Battery 1 x button cell (CR2025 3V) DVD playback NTSC, PAL Compatible media Video DVD, DVD±R/RW Audio 8/12cm CD, CD-R, CD-RW Compatible formats MPEG1 (DAT), MPEG2 (DAT, VOB, MPG), MPEG4 (AVI, MP4), JPEG, MP3, WMA Connectors DVD player Voltage output monitor DC OUT 12V 500mV Video I/O jack (3.5mm) Audio I/O jack (3.5mm), stereo Optical output jack (3.5mm) Earphones output jack (3.5mm), stereo USB USB port Connectors monitor Video input jack (3.5mm) Audio input jack (3.5mm), stereo Earphones output jack (3.5mm), stereo Headphones Manufacturer / Type DongZang / DY-EP137-B002S Impedance 32Ω...
-
Page 47: Disposal
Disposal Battery Please remember that as the end user you are obligated to dispose of exhausted batteries via the dealer or a public disposal site. The same applies for rechargeable batteries. Device Please remember that your consumer electronics equipment is subject to the European directive 2002/96/EC to reduce electronic scrap. • Therefore, it is prohibited to dispose of your equipment in the household garbage. • Information regarding the disposal of old devices is available at your local municipality, at the garbage disposal administration, and at the shop where you acquired this product. • You can return this device free of charge at local collecting points. • Proper disposal of old equipment prevents environmental damages and does not endanger your health.