Digital Setup - Silvercrest SDV-702 User Manual

15.6 Digital setup
• Press SETUP (38) and select

DIGITAL SETUP.

OP MODE
DYNAMIC
RANGE
EXIT SETUP Exit the setup menu.
LINE OUT Select this setting to limit the output
signal. This setting is best suited
for night operation, since the output
volume is limited.
RF
This setting offers an optimal
REMOD
playback with less volume. The loud
playback passages are absorbed
and the quiet passages are played
slightly louder. This setting is best
suited during the day. The function is
only possible with digital sound.
If you selected the option LINE OUT, you can set
the limit of the output signal.
If the playback is too loud or too quiet, you can
absorb peak sections with this function and play
quiet sections louder.
Press (68) / (64) to select a value (OFF,
1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8, FULL) and press
(66) to confirm.
In the OFF setting the sound is reproduced
in original dynamics. In the FULL setting, the
output signal is limited, i.e. the loud passages are
reduced in volume, while the volumes of the quiet
parts are raised.
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
EXIT SETUP
41