12
Mounting
•
Mount the DVD player with the
head rest holder to the head rest
in your vehicle
•
Fasten the mounting plate with the
four Phillips screws and washers
on the rear of the DVD player.
The arrow on the mounting plate
should point upward.
•
Place the mounting plate with the
foam material side against the
head rest and place the straps
over and under the head rest.
•
Tighten the straps firmly and close
the Velcro fasteners.
•
Insert the DVD player from above
into the mounting plate. Push the
unit downward until it locks into
place.
•
Connect the supplied car adapter
to DC IN (20) on the DVD player.
•
Connect the car adapter to a well
accessible 12V cigarette lighter
jack or 12V vehicle power supply
output jack. The car adapter LED
lights up red during operation.
Note:
•
Observe the safety instructions for in-car operation on page 10.
24