Charging Assembly; Outline; Removing The Primary Charging Assembly; Removing The Grid Plate - Canon CLC 1120 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM
C. Charging Assembly

1. Outline

The copier has five charging assemblies
equipped with charging wires, each of which
is 0.06 mm in diameter.
2. Removing the Primary Charging

Assembly

1) Open the hopper unit fully.
2) Disconnect the connector [1], and remove
the screw [2]; then, detach the primary

charging assembly [3].

3. Removing the Grid Plate

1) Remove the primary charging assembly.
2) Remove the screw [1], and remove the
grid plate [2].
6-62
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
[3]
Figure 6-621
[2]
Figure 6-622
[1]