Relay Memory Box - Canon ImageRUNNER 2830 Facsimile Manual

NOTE
•
If you make a mistake when entering the subaddress/password, press
enter the correct subaddress and password.
•
If you want to cancel storing the subaddress/password, press [Cancel].
10
Press [Done] repeatedly until the Fax Basic Features screen
appears.

Relay Memory Box

A Relay Memory Box enables you to forward received documents to a number of
specified destinations at a specified time, using the machine as a relay unit.
You can set the Relay Start Time, and relay all of the documents stored in the
memory box at the same time. (See "Memory Boxes," on p. 3-5.)
You can specify the following items for the Relay Memory Box.
Item
Memory Box Name
Password
Subaddress
RX Password
Relay Sending
Destination
*1
Indicates the default setting.
Description
Sets the memory box name.
Sets a password to control the memory box.
It is necessary to enter the password to
change the contents of the memory box, or to
print documents received in the memory box.
Sets an ITU-T standard subaddress. A
subaddress is required to distinguish a Relay
Memory Box from other memory boxes.
Sets an ITU-T standard password. If a
password has been set, the password added
to the received documents is compared with
the set password. If the passwords do not
match, the documents are not received.
Sets the destination to which the received
documents in the memory box are sent.
(Clear) ➞
Setting
Relay *1
24 characters
maximum
Not required
A one to seven digit
number
Required
Numbers, #, *, and
spaces can be used
(up to 20 digits).
Not required
Numbers, #, *, and
spaces can be used
(up to 20 digits).
Specify the
destination using the
Address Book or
Coded Speed Dialing.
Setting Up Memory Boxes
5
5-71