Restricting New Addresses
This mode enables you to restrict the entering of new destinations. When you set
Restrict New Addresses to 'On' while the machine is in the System Management
mode, the following is restricted:
•
Specifying a destination using
destinations on the RX Job Status screen)
•
Redialing the last destination
•
Registering destinations in the Address Book
•
Sending faxes from a computer using the fax driver
IMPORTANT
Restrict New Addresses can only be set by the System Manager.
NOTE
The default setting is 'Off'.
1
Press
[Restrict New Addresses].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
-
(numeric keys) (including Forward
(Additional Functions) ➞ [System Settings] ➞
(numeric keys) ➞ press
-
Restricting New Addresses
6
(ID).
6-33