Available Paper Sizes - Canon ImageRUNNER 2830 Facsimile Manual

Available Paper Sizes

When received documents are printed, they are printed from the paper drawer that
has the same size paper as the received document. If paper of the correct size is
not available, the machine automatically selects a different paper size in the
following order. The paper size is automatically selected in the same order, even if
paper runs out during printing.
■ Available Paper Sizes for Received Documents
11" x 17" originals
LGL originals
LTR originals
STMT originals
*1 Received documents are automatically reduced before being printed on the paper size indicated.
IMPORTANT
Received documents can be printed on the following paper sizes and paper types:
Paper Sizes: 11" x 17", LGL, LTR, LTRR, or STMTR
Paper Types: plain, recycled, or color
NOTE
•
You can specify one or all paper drawers specifically for the Fax function. The default
setting is 'On', except for the stack bypass. (See Chapter 4, "Customizing Settings," in
the Reference Guide.)
•
You can set the machine to reduce received documents from 75% to 97% in 1%
increments if the document is larger than any of the available paper sizes. (See
"Reducing a Received Document," on p. 5-58.)
•
You can change the order of paper selection. (See "Paper Drawer Selection," on p. 5-54.)
•
You can set the machine to print received documents on both sides of the paper. (See
"Two-Sided Printing," on p. 5-61.)
•
You can print two received documents of the same paper size on a single sheet of paper.
(See "2 On 1 Log," on p. 5-63.)
•
Received documents are output face down, in the order in which the pages are received.
11" x 17" ➞ LGL ➞ STMTR x 2
*1
LGL ➞ LTR x 2 ➞ STMTR x 2 ➞ 11" x 17"
LTR ➞ LGL ➞ STMTR x 2 ➞ 11" x 17"
STMTR ➞ LTR ➞ LGL ➞ 11" x 17"

Available Paper Sizes

2
2-35