Hitachi CMPAT04 Installation Instructions Manual page 8

2. Installing the CMP401X supports
Fasten the two supports to the back of the plasma
display with 4 M4 12 screws.
X
M4 12 screws
X
(2 each)
Support fittings
CMP402HD
1. Remove the top case of the cardboard box and
the polyethylene bag.
CMP307X
1. Remove the stand.
Remove the top case of the cardboard box and the
polyethylene bag.
When a stand is attached to the plasma display,
remove the four screws and detach the stand.
Remove 4 screws.
and remove the stand.
Display mount
M6
(3 each)
CMP307X plasma
display
Stand
3. Installing the display mounts
fasten the two display mounts to the back of the
plasma display with 6 M6
M6 X 18 screws
(3 each)
Align the
protrusion of
the support
with the
outer hole.
2. Mounting the display mount.
Mount the display mounting fixtures (left / right) on
the back of the plasma display unit with the bent part
facing inward, then fasten with six M6
Display mount
(right)
18 screws
X
2. Mounting the display mount.
Mount the display mounting fixtures (left / right) on
the back of the plasma display unit with the bent part
facing inward, then fasten with six M6
Display mount
(right)
M6 18 screws
X
(3 each)
- 8 -
18 screws.
X
The top hole of the
display mount.
The top hole of the
plasma display.
The 3rd display mount
hole from the top.
The 6th display mount
hole from the top.
18 screws.
X
Display mount
(left)
2nd display mount hole
from the top.
4th hole from the top.
5th hole from the top.
18 screws.
X
2nd display mount
hole from the top.
Display mount
(left)
2nd plasma display
hole from the top.