Motorola AP-51XX Product Reference Manual page 429

AP51xx>admin(network.wireless.radio)> set
Description:
Enables an access point Radio and defines the RF band of operation.
Syntax:
set 11a
11bg
mesh-base
mesh-max
mesh-client
mesh-timeout
mesh-wlan
dot11-auth
Example:
admin(network.wireless.radio)>set 11a disable
admin(network.wireless.radio)>set 11bg enable
admin(network.wireless.radio)>set mesh-base enable
admin(network.wireless.radio)>set mesh-max 11
admin(network.wireless.radio)>set mesh-client disable
admin(network.wireless.radio)>set mesh-timeout 1 45
admin(network.wireless.radio)>set mesh-wlan wlan1
admin(network.wireless.radio)>set dot11-auth shared-key-allowed
admin(network.wireless.radio)>show
Radio Configuration
Radio 1
Name
Radio Mode
RF Band of Operation
Wireless AP Configuration:
Base Bridge Mode
Max Wireless AP Clients
Client Bridge Mode
Clitn Bridge WLAN
Mesh Connection Timeout
Dot11 Auth Algorithm
For information on configuring the Radio Configuration options available to the access point using the applet (GUI), see
WLAN's Radio Configuration on page
<mode> Enables or disables the access point's 802.11a radio.
<mode> Enables or disables the access point's 802.11b/g radio.
<mode> Enables or disables base bridge mode.
Sets the maximum number of wireless bridge clients.
<mode> Enables or Disables client bridge mode.
<period> Sets the client bridge link timeout for the radio index..
<name> Defines the client bridge WLAN name.
<auth-algorithm> Defines dot11 level authentication algorithm to either
shared-key-allowed.
5-51.
: Radio 1
: enable
: 802.11b/g (2.4 GHz)
: enable
: 11
: disable
: WLAN1
: 45 sec.
: shared-key-allowed
8-95
open-system-only ot
Setting the