7.2
7.2.1
Sense
key
00
3
4
1
3
E
5
4 or B
B
C141-E270
Downloaded from
www.Manualslib.com
Sense Data Analysis
Error information indicated with sense data
Table 7.1 lists the definition of sense data. For details of sense data, refer to Chapter 5 "Sense
Data Error Recovery Methods" of the SCSI Logical Interface Specifications.
Subsection 7.2.2 onwards explain troubleshooting using sense data.
Table 7.1
Sense data
Additional
Additional
sense code
sense code
qualifier
00
00
0C
03
32
00
40
xx
C4
xx
1x
xx
1x
xx
1D
00
2x
xx
90
00
44
xx
47
xx
48
00
49
00
4D
xx
4E
00
manuals search engine
Definition of sense data
Definition
Operation was normal.
A write to a disk terminated abnormally.
Failed to allocate the alternate block in the alternate processing.
An error occurred in power-on self-diagnosis.
An HDD error occurred.
A disk read error occurred.
A disk read error occurred.
Data discrepancy found by VERIFY command byte check.
An SCSI error, such as an invalid operation code, occurred.
The RESERVE or RELEASE command cannot be executed
because the SCSI ID of the initiator was not posted in the
SELECTION phase.
A hardware error occurred inside the HDD.
A parity error occurred in the SCSI data bus.
Initiator Detected Error message was received.
An uncounted or inappropriate message was received.
Before completion of a command, a command with the same tag
number was issued.
An overlap command was issued.
115