Connect The Acd Report Server To The Pbx - Panasonic KX-NCV200 Getting Started Manual

Acd report server

Hide thumbs Also See for KX-NCV200:

Table of Contents

Enter the Password and click OK. The ACD Report Server main window is displayed. The default

Password is 1234.

Note that you can change the server location at every login by clicking on the Server Location button, before

specifying the password. Inside the Server Location window specify the server address and port number of the

Voice Processing System.

2.2.4. Connect the ACD Report Server to the PBX

Before using the ACD report Server you need to connect the ACD Report Server to the PBX. Follow the steps

below:

Start the ACD Report Server. At first, the ACD Report Server is not connected to the PBX. Go to

Configuration> Configuration Settings. The default password is 1234. From Current System State the

PBX Connection field is Disconnected.

Table of Contents