Configuring The Device Function Settings; Configuring The Controller Version - Canon MF7280 - ImageCLASS B/W Laser Driver Manual

Configuring the Device Function Settings

If you cannot set up the printer configuration automatically (see "Configuring
Automatically," on p. 2-39), you can enable the device functions manually,
according to your needs.
2
NOTE
For the imageRUNNER C3170, imageRUNNER 105+, imageRUNNER 2230,
imageRUNNER 2830, imageRUNNER 2870/2270, imageRUNNER 2870G/2270G,
imageRUNNER 3530, imageRUNNER 4570/3570, imageRUNNER 4570G/3570G,
imageRUNNER 7105/7095/7086, imageRUNNER 8070, imageRUNNER 85+, and
imageRUNNER 9070, the available functions vary depending on the version of the
controller for your printer. The controller version must be configured in order to use the
supported functions.

Configuring the Controller Version

1
2
3
2-44

Configuring the Device Function Settings

Print the Configuration Page.
❑
On the printer control panel, press
❑
Press [Report Settings] ➞ [Printer] under <Print List>.
❑
Press [UFR II] ➞ [Configuration Page] ➞ [Yes].
NOTE
The procedure of printing the Configuration Page differs depending on the model of
the printer you are using.
Confirm the Controller Function ID and Function Version
printed on the Configuration Page.
On the [Start] menu, point to [Settings] ➞ click [Printers].
NOTE
•
If you are using Windows XP Professional/Server 2003, on the [Start] menu, click
[Printers and Faxes].
•
If you are using Windows XP Home Edition, on the [Start] menu, click [Control
Panel] ➞ [Printers and Other Hardware] ➞ [Printers and Faxes].
(Additional Functions).