Chapter 5
Universal Port and Dial-Only Feature Cards
Figure 5-10
Align the captive screws with their holes, and then seat the card completely.
Step 3
Seat the feature card in the carrier by pushing the card firmly until the captive screws are aligned with
Step 4
their holes.
Tighten the screws to secure the feature card to the chassis. (See
Step 5
Figure 5-11
Figure 5-12
78-17406-01
Installing the Universal Port or Dial-Only Feature Card in the Cisco AS5400XM
Universal Gateway
Tightening the Captive Screws on the Cisco AS5350XM Universal Gateway
DFC
Captive
screw
Captive
screw
Tightening the Captive Screws on the Cisco AS5400XM Universal Gateway
Captive
Captive
screw
screw
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
Online Insertion and Removal of the Universal Port or Dial-Only Feature Card
Carrier card
Figure 5-11
and
Figure
5-12.)
Chassis
5-9