Pc Adjust Status Read Command; Cr_Fsync Command; Cr_Tdots Command; Cr_Clamp Command - Sanyo PLC-WXU300 - 2500 Lumens Manual

PLC-WXU300 Expand Serial Command Functional Specifications

9.5 PC Adjust Status Read Command

9.5.1

CR_FSYNC Command

Command "CR_FSYNC"[CR]
Details Get Fine Sync value
Acceptable
%a
Response
Unacceptable
9.5.2

CR_TDOTS Command

Command "CR_TDOTS"[CR]
Details Get Total Dots value
Acceptable
%a
Response
Unacceptable
9.5.3

CR_CLAMP Command

Command "CR_CLAMP"[CR]
Details Get Clamp value
Acceptable
%a
Response
Unacceptable
9.5.4 CR_H – POS Command
Command
"CR_H
Details Get Horizontal Position value
Acceptable
%a
Response
Unacceptable
"000_%a"[CR]
"0000"~"0031"
"Error Code"[CR] ----- When the command is invalid due to
"?"[CR] -------------------- When unclear command is received
"000_%a"[CR]
"nnnn"~"mmmm"
(nnnn = Display Dots + Horizontal Position)
(mmmm= Maximum value depends on input signal)
"Error Code"[CR] -------- When the command is invalid due to
"?"[CR] ----------------------- When unclear command is received
"000_%a"[CR]
"0001"~"nnnn"
("nnnn" depends on input signal)
"Error Code"[CR] -------- When the command is invalid due to
"?"[CR] ----------------------- When unclear command is received
-
POS"[CR]
"000_%a"[CR]
"0000"~"nnnn"
(nnnn = Total Dots - Display Dots)
"Error Code"[CR] -------- When the command is invalid due to
"?"[CR] ----------------------- When unclear command is received
50/72
condition such as Input source
condition such as Input source
condition such as Input source
condition such as Input source