PLC-WXU300 Expand Serial Command Functional Specifications
9.8 Screen Status Read Command
9.8.1
CR_SCREEN Command
Command
"CR_SCREEN"[CR]
Details
Get selected on-screen image size
Acceptable
%a
Response
Unacceptable
9.8.2
CR_ KYSTNMODE Command
Command
"CR_KYSTNMODE"[CR]
Details
Get setting status of Keystone Store Mode
Acceptable
Response
%a
Unacceptable
9.8.3
CR_VSCALE Command
Command
"CR_VSCALE"[CR]
Details
Get setting status of Vertical Scale Store Mode
Acceptable
Response
%1
Unacceptable
9.8.4
CR_VPOS Command
Command
"CR_VPOS"[CR]
Details
Get setting status of Vertical Position Store Mode
Acceptable
Response
%1
Unacceptable
"000_%a"[CR]
"NORMAL" --------------- Normal mode is selected
"TRUE" -------------------- True mode is selected
Input
"FULL" --------------------- Full mode is selected
is
"CUSTOM" ---------------- Custom mode is selected
PC
When the screen is set to D.Zoom, projector returns the previous
status (NORMAL )
"NORMAL" ---------------------- Normal mode is selected
"ZOOM" -------------------------- Zoom mode is selected
Input
"NATURAL" --------------------- Natural wide is selected
is
"WIDE" ---------------------------Wide mode is selected
Video
"FULL" --------------------------- Full mode is selected
"CUSTOM" ---------------------- Custom size is selected
"Error Code"[CR] ------ When the command is invalid due to
"?"[CR] ----------------------- When unclear command is received
"000_%a"[CR]
"STR" ---------------------- Store mode is "Store"
"RST" ---------------------- Store mode is "Reset"
"Error code"[CR]
"000_%1[CR]
"-32" ~ "032"
"Error code"[CR]
"000_%1"[CR]
"-15" ~ "015"
"Error code"[CR]
57/72
condition such as Input source