Tools Needed - Craftsman 113.22560 Owner's Manual

WARNING:
FOR YOUR OWN SAFETY, DO NOT
ATTEMPT TO OPERATE YOUR SANDER/GRINDER
UNTIL IT IS COMPLETELY ASSEMBLED ACCORDING
TO THE INSTRUCTIONS, AND THAT YOU
UNDERSTAND THE FOLLOWING (SEE CONTENTS...
PAGE 3.)
1. General safety Instructions for Power Tools (Page 2)
2. Getting to Know Your Sander/Grinder (Page 5)
3. Basic Sander/Grinder Operations (Page 6)
4. Maintenance (Page 8)
5. Power Source Outlet. This tool should be grounded
while in use to protect the operator from electric shock,
See "Motor Specifications and E lectrical Requirements"
section further on in this manual,
6. Support Workpiece. Maintain control of workpiece at
a|l times,
7. Do Not Wet Grind or Polish. Never use a steady stream
of water on the workpiece. Only quench the workpiece
in water to cool it,
8, Do Not Grind or Polish Magnesium... because it could
catch on fire.
9. Note and follow Safety Instructions that appear on the
belt guard.
_FTSMRN
NOTORIZED S ANDER-GRINDER
10. THINK SAFETY: Safety is a combination of operator
common sense and alertness at all times when the
Sander/Grinder is being used,
WARNING: DO NOT ALLOW FAMILIARITY (GAINED
FROM FREQUENT USE OF YOUR SANDER!GRINDER)
TO BECOME cOr_MONPLACE, ALWAYS REMEMBER
THAT A CARELESS FRACTION OF A SECOND IS
SUFFICIENT TO INFLICT SEVERE INJURY.
WEAR YOUR
The operation of any power tool can result in foreign
objects being thrown into the eyes, which can result in
severe eye damage. Always wear safety goggles complying
with ANSI Z87,1 (shown on Package) before commencing
power tool operation. Safety Goggles are available at Sears
retail or catalog stores.
CONTENTS
Page
General Rules for Power TooUs ................... 2
Additional Safety Instructions for Sander Grinder .... 3
Motor Specifications and Electrical Requirements .... 4
Assembly .................................... 5
Installing Abrasive Belt ...................... 5
Tracking Abrasive Belt ...................... 5
Getting to Know Your Sander/Grinder ............. 6
Basic Sander/Grinder Operation .................. 6
Sanding Wood or Plastics ..................... 6
Grinding Metal ............................. 7
Inside Work ............................... 7
Sharpening ................................ 8
Polishing ................................. 8
Maintenance ................................. 8
Lubrication .................................. 8
Recommended Accessories ...................... 9
Trouble Shooting .............................. 9
Repair Parts ................................. 10
TOOLS NEEDED
9/t6 INCH WRENCH
COMBINATION SQUARE