Scanning; Placing Your Original Document - Epson 1000 ICS Basics Manual

Scanning

With your EPSON 1000 ICS you can scan files directly to your computer and various
applications using EPSON Smart Panel, scan with advanced settings in EPSON
TWAIN, and set up the ]

Placing Your Original Document

1. Raise the document cover
and place your document
face-down on the document
table glass.
2. Position the document so the
horizontal and vertical edges
are aligned with the guides
on the top and left side of the
document table. Be sure to
leave a small gap because an
area of 0.2 inch (5 mm) out
from the guides is not
scanned.
3. Close the document cover slowly. Be careful not to move the document.
If you place your document against the guides, the document edges next
to the guides won't be scanned.
button for one-touch scanning.
Scan
not scanned
17
Scanning