Printing A Nozzle Check; Problems And Solutions; Setup And Software Installation Problems - Epson 1000 ICS Basics Manual

Printing a Nozzle Check

You can print a nozzle check to determine whether a problem comes from the
EPSON 1000 ICS itself or some other source.
1. Make sure letter-size or larger paper is loaded in the sheet feeder.
2. Press the left Menu button on the control panel until you see
3. Press the x
Copy
If the check page prints, the problem probably lies in your software settings, the
interface cable, or your computer. If the check page doesn't print, you may have a
problem with your printer. Try the suggestions in "Problems and Solutions" below.

Problems and Solutions

Below are some troubleshooting tips for your EPSON 1000 ICS and its software.

Setup and Software Installation Problems

The EPSON 1000 ICS
makes noise after ink
cartridge installation.
button.
The first time you install ink cartridges, the EPSON
1000 ICS must charge its ink delivery system. Wait
until charging finishes (the P
flashing) before you turn off the EPSON 1000 ICS or
it may charge improperly and use excess ink the next
time you turn it on. If the EPSON 1000 ICS stops
moving or making noise, but the P
still flashing after 5 minutes, turn it off. If the light is
still flashing when you turn it back on, see "Where To
Get Help" on page 49.
Make sure the ink cartridge clamps are locked down
completely and that no packing material remains in
the printer. Turn off the printer, wait a moment, then
turn it back on to clear the error.
.
Nozzle Check
light stops
Operate
light is
Operate
Problem Solving
39