Cleaning The Epson 1000 Ics - Epson 1000 ICS Basics Manual

8. Press down firmly on the ink cartridge clamp until it snaps in place.
If you need to replace the other ink cartridge, repeat steps 4 through 8 before
continuing with step 9.
9. Carefully lower the scanner and press it down until it clicks into place. Press the
button. The EPSON 1000 ICS begins charging the ink delivery system.
Copy
x
The P
Operate
takes about half a minute. When it's finished, the P
and stays on, and the
Never turn off the EPSON 1000 ICS while the
unless the EPSON 1000 ICS hasn't moved or made noise for more than
5 minutes.

Cleaning the EPSON 1000 ICS

To keep your EPSON 1000 ICS operating at its best, you should clean it periodically.
1. Turn off the EPSON 1000 ICS, unplug the power cord, and disconnect the USB
cable.
2. Remove all paper, then use a soft brush to clean any dust or dirt from the sheet
feeder.
3. Clean the exterior with a soft, damp cloth.
light flashes and the EPSON 1000 ICS makes noise. Charging
light goes out.
Error
light stops flashing
Operate
P Operate light is flashing,
31
Maintenance