Figure 1.12 Host Interface Port (Fc Model); Figure 1.13 Host Interface Port (Iscsi Model); Figure 1.14 Host Interface Port (Sas Model); Table 1.1 Host Interface Port Specifications - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 1 Hardware Configurations
1.1 Controller Enclosure
■
Host interface ports
Host interface ports are used to connect controllers to servers.
Two host interface ports can be installed in the controller of an ETERNUS DX Disk storage sys-
tem.
FC, iSCSI, and SAS are available as host interface.
●
FC model

Figure 1.12 Host interface port (FC model)

●
iSCSI model

Figure 1.13 Host interface port (iSCSI model)

●
SAS model

Figure 1.14 Host interface port (SAS model)

The following table shows the host interface port specifications.
Table 1.1
FC
iSCSI
SAS
ETERNUS DX60 S2 Disk storage system User's Guide -Site Planning-
Host interface port specifications
Interface Transfer speed (max.)
4Gbit/s
1Gbit/s
3Gbit/s
Copyright 2012 FUJITSU LIMITED
FC ports (0 (Left), 1 (Right))
iSCSI ports (0 (Left), 1 (Right))
SAS ports (0 (Left), 1 (Right))
Connector type
SFP
RJ-45
miniSAS (SFF8088)
16
Number of ports for
each controller
2
2
2
P3AM-5492-04ENZ0