Expanders; Power Supply Units; Figure 1.21 Side View Of A Drive Enclosure; Figure 1.22 Expander (Drive Enclosure) - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 1 Hardware Configurations
1.2 Drive Enclosures
●
Side view

Figure 1.21 Side view of a drive enclosure

1.2.1

Expanders

The expander is a component that controls the interaction between the controller and the disks.

Figure 1.22 Expander (drive enclosure)

■
Drive interface ports
A DI port is used to connect a controller enclosure.
The following table shows the DI port specifications.
Table 1.5
SAS
1.2.2

Power Supply Units

The power supply unit transforms input AC power from a power socket to DC power and supplies
power to each component. Two power supply units are installed in each drive enclosure.
Each power supply unit contains fans.

Figure 1.23 Power supply unit (drive enclosure)

ETERNUS DX60 S2 Disk storage system User's Guide -Site Planning-
DI port specifications
Transfer
Interface
speed (max.)
3Gbit/s
Copyright 2012 FUJITSU LIMITED
DI (IN) port
This is not used.
Connector type
miniSAS (SFF8088)
20
Number of ports for each expander
1 (IN)
P3AM-5492-04ENZ0