Selecting An International Character Set - Epson 1010 User Manual

Selecting an International Character Set

International character sets provide you with the characters and
symbols used in other languages. You can select one of eight
international character sets by changing the DIP switch settings.
Whenever the printer is turned on, reset, or initialized, the character
set selected by the DIP switches becomes the default character set.
To select an international character set, set DIP switches 1-1,1-2, and
1-3 according to the table below.
Note: DIP switch 1-7 must be off. To select an international
character set when DIP switch 1-7 is on, use the ESC R command.
This table also shows the characters that differ in each international
character set.
Country
23 24 40 58 5C 5D 5E 60 7B 7C 7D 7E
0
U.S.A.
France
1
2
Germany
3
U.K.
Denmark
4
Sweden
5
6
Italy
7 Spain
Note: To change the setting of a DIP switch, first turn off the
printer, change the DIP switch setting, and then turn the printer
back on.
3-22 Using the Printer
ASCII code hex
DIP SW
1-1 1-2 1-3
ON ON
ON
ON OFF
ON
ON OFF ON
OFF
OFF
ON
OFF ON
ON
ON
OFF
OFF
OFF OFF
ON
OFF OFF
OFF