Dip-Switch Functions - Epson 5000+ User Manual

Page length
Page length
8.5 inches (216 mm)
11 inches (279 mm)
11.7 inches (296 mm)
12 inches (305 mm)

DIP-switch functions

This section describes the functions of the DIP switches.
International character sets
You can choose from eight international character sets by
setting DIP switches 1-1, 1-2, 1-3, and 1-4 according to the
"International character sets" table on page 3-19. See the
Appendix for character samples.
The character sets you can select by DIP switch are USA,
France, Germany, United Kingdom, Denmark I, Sweden, Italy,
and Spain I. However, you can select the following sets only
with the ESC R software command: Japan (English), Norway,
Denmark II, Spain II, Latin America, Korea, and Legal.
Note:
If you send the ESC t 0 command
1-4 is on, the international character set is always USA.
Character tables
Your printer has either 13 (for the European version) or 8 (for
other versions) built-in character tables: 1 italics table and 12
(for the European version) or 7 (for other versions) graphics
character tables.
3-10 Using the Printer
2-1 2-2
Off On
Off
Off
On On
On Off
select italics) while DIP switch
(to