2.
While holding down the
button to feed the paper forward or the
feed the paper backward, as indicated by the arrows above
the buttons.
Adjusting the loading position
The loading position is the position of the paper after it has
been automatically loaded by the printer. If printing is too high
or low on the page, change the loading position with the
micro-feed feature as follows:
1. Make sure the printer is turned on. If necessary, lift the
printer cover up so you can see the paper position.
2. Load either continuous or single-sheet paper. (Load
continuous paper by pressing the
The
MULTI-PART light
Note:
You can adjust the loading position only while the MULTI- PART light
is flashing.
button, press
ALT
LOAD/EJECT
begins to flash.
the LOAD/EJECT
button to
LF/FF
button.)
Using the Printer
3-15