Table of Contents
Advertisement
GETTING
STARTED
Step 3c. Digital TVICable Reception with DTV-Compatible TV
Follow this diagram
if you have a DTV-compatible
TV, cable service
and you want to
receive
digital
channels
through
the STB and cable channels
through
the cable
box
(or through
the TV if you have no cable box).
Optional Cable Box
ANT
IN
ANT
OUT
NOTE:
ANTENNA, CABLE BOX, RF CABLE
AND AUDIO CABLES NOT INCLUDED
DTV-Compatible TV
DIG_ALTV
iNPUT
STB
DIGITAL TV/CABLE RECEPTION WITH DTV-COMPATIBLE TV
SETUP
Procedure
Connect the antenna cable to the STB ANT (antenna) jack.
If using a cable box, connect the cable wire from the wall jack to the cable box ANT
(antenna) IN jack using a standard RF cable with a coaxial connector.
Connect the cable
box ANT (antenna) OUT jack to the DTV-compatible
TV ANT (antenna) IN jack using a RF
cable.
•
If not using a cable box, connect the cable wire from the wall jack to the DTV-compatible TV
ANT (antenna) IN jack using a RF cable (not shown).
•
Follow directions in Getting Started section to connect the STB to a DTV-compatible TV.
[]
Advertisement
Table of Contents
